background image

Table 1. Navigation Keys

Keys

Navigation

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

<Enter>

Allows you to select a value in the selected field (if applicable) or follow the link in 
the field.

Spacebar

Expands or collapses a drop

down list, if applicable.

<Tab>

Moves to the next focus area.

NOTE: For the standard graphics browser only.

<Esc>

Moves to the previous page till you view the main screen. Pressing <Esc> in the 
main screen displays a message that prompts you to save any unsaved changes and 
restarts the system.

<F1>

Displays the System Setup help file.

System Setup Options

NOTE: Depending on the computer and its installed devices, the items listed in this section may or 
may not appear.

Table 2. General

Option

Description

System 
Information

This section lists the primary hardware features of your computer.

• System Information: Displays BIOS Version, Service Tag, Asset Tag, 

Ownership Tag, Ownership Date, Manufacture Date, and the Express Service 

Code.

• Memory Information: Displays Memory Installed, Memory Available, Memory 

Speed, Memory Channels Mode, Memory Technology, DIMM ASize, DIMM B 

Size,

• Processor Information: Displays Processor Type, Core Count, Processor ID, 

Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, 

Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit 

Technology.

• Device Information: Displays Primary Hard Drive, MiniCard Device, ODD 

Device, Dock eSATA Device, LOM MAC Address, Video Controller, Video BIOS 

Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-

Fi Device, WiGig Device, Cellular Device, Bluetooth Device.

Battery 
Information

Displays the battery status and the type of AC adapter connected to the computer

Boot Sequence

Boot Sequence

Allows you to change the order in which 
the computer attempts to find an 
operating system. The options are:

• Diskette Drive
• Internal HDD
• USB Storage Device
• CD/DVD/CD-RW Drive

44

Summary of Contents for Latitude E5440


































































Reviews: