background image

Option

Description

Default setting: The option is enabled.

C-States Control

Allows you to enable or disable the additional processor sleep states.

• C states

Default setting: The option is enabled.

Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of the processor.

• Enable Intel TurboBoost

Default setting: The option is enabled.

Hyper-Thread 
Control

Allows you to enable or disable the Hyper-Threading in the processor.

• Disabled
• Enabled

Default setting: Enabled.

Power Management screen options

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when 
an AC adapter is connected.
Default setting: Wake on AC is not selected.

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The 
options are:

• Disabled
• Every Day
• Weekdays
• Select Days

Default setting: Disabled

USB Wake 
Support

Allows you to enable USB devices to wake the system from Standby.

NOTE: This feature is only functional when the AC power adapter is 
connected. If the AC power adapter is removed during Standby, the system 
setup removes power from all the USB ports to conserve battery power.

• Enable USB Wake Support

Default setting: The option is disabled.

41

Summary of Contents for Latitude E5570





























































Reviews: