Parallel Port
Default Setting: ECP
Serial Port
Allows you to configure the integrated serial port. The options are:
Disabled
,
COM1
,
COM2
,
COM3
, and
COM4
Default Setting:
COM1
SATA Operation
Allows you to configure the internal SATA hard drive controller. The options are:
Disabled
,
ATA
,
AHCI
, and
RAID On
Default Setting:
RAID On
Miscellaneous Devices
Allows you to enable or disable the following devices:
l
Internal Modem
l
Module Bay
l
ExpressCard or PC Card
l
Media Card, PC Card and 1394
l
External USB Port
l
Microphone
l
eSATA Ports
l
Hard Drive Free Fall Protection
l
Camera and Microphone
Default setting:
All enabled
.
Latitude ON™ Reader
Allows you to configure the operating mode of the Latitude ON Reader. The options are:
Disabled
and
Enabled
Default Setting:
Enabled
Keyboard Illumination
Allows you to configure the keyboard illumination feature. The options are:
Disabled
,
Auto ALS and Input
, and
Auto Input
Only
Default Settings:
Disabled
Video
Option
Description
Ambient Light Sensor
To enable the Ambient Light Sensor, select the
Ambient Light Sensor
check box.
Default Settings:
Disabled
LCD Brightness
Allows you to set the display brightness depending up on the power source (
On Battery
and
On AC
).
Security
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password. When set, the admin password enables several
security features including:
l
Restricts changes to the settings in Setup
l
Restricts the boot devices listed in the <F12> Boot Menu to those enabled in the "Boot Sequence" field
l
Prohibits changes to the owner and asset tags
l
Substitutes for the system and hard drive password
NOTE
: You must set the admin password before you set the system or hard drive password.
NOTE:
Successful password changes take effect immediately.
NOTE
: Deleting the admin password automatically deletes the system password as well.
Default Setting:
Not Set
System Password
Allows you to set, change, or delete the system password. When set, your computer requests you to enter the system
password every time your computer turns on or restarts.
NOTE:
Successful password changes take effect immediately.
Default Setting:
Not Set
Internal HDD Password
This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take
place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even
when installed in another system.
Default Setting:
Not Set
Password Bypass
Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes from
standby.
You can set
Password Bypass
to
Disabled
and
Reboot Bypass
.
NOTE:
You cannot bypass the system or hard drive password when you turn on your computer that has been shut down.
Default Setting:
Disabled
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set.
Default Setting:
Allow Non-Admin Password Changes checked
Strong Password
Allows you to enable of disable option to enforce strong passwords. If enabled, all passwords set on the computer must
contain at least one uppercase character, one lowercase character and be at least 8 characters long. Enabling this feature
automatically changes the default minimum password length to 8 characters.
Default Setting:
Disabled
Allows you to enable or disable the Trusted Platform Module (TPM) on the computer.
NOTE
: Disabling this option does not change any settings you may have made to the TPM, or delete any information or keys
you may have stored there.
Summary of Contents for Latitude E6410
Page 6: ...Back to Contents Page ...
