3–Fibre Channel Configuration
Configuring End-to-End CS_CTL QoS
90
CU0354604-00 P
6.
To create the vPorts, click
Create
.
shows an example.
Figure 3-37. Creating vPorts in QConvergeConsole GUI
To create a vPort in interactive QConvergeConsole CLI:
1.
On the
Main Menu
, select
Adapter Configuration
.
2.
On the
Adapter Type Selection
menu, select
Virtual Ports (NPIV)
.
3.
On the
Virtual Ports
menu, select
Adapter Port
.
4.
On the
Adapter Port
menu, select
Create vPorts
.
5.
On the
Create vPorts
menu, select
Generate
.
6.
To create the vPorts, select
Commit
.
Changing the vPort Priority Level
To change the vPort priority level using QConvergeConsole GUI:
1.
In the QConvergeConsole GUI left pane, connect to the host that contains
the 2600 Series Adapter whose vPort levels you want to change.
2.
Expand the host in the left pane by clicking the plus sign (
+
).
3.
Locate and expand the 2600 Series Adapter whose vPort levels you want to
change.
4.
In the right pane, click the
QoS
tab.
5.
In the
QoS Type
box, select
Priority
.
6.
Ensure that the check box for the vPort you want to change is selected.