3–Fibre Channel Configuration
Using Fast!UTIL for Custom Configuration
37
CU0354604-00 P
4.
A message indicates that the configuration settings have been modified.
Select
Save changes
.
5.
To load the new parameters, reboot the system.
The
Fast!
UTIL
Options
menu provides the following options:
Configuration Settings
The following sections show and describe the 2600 Series Adapters
Configuration Settings
menu options in
Fast!
UTIL:
Adapter Settings
describes the adapter settings.
CAUTION
If the configuration settings are incorrect, your 2600 Series Adapter may not
function properly.
Table 3-1. Adapter Settings
Setting
Values
Default
Description
Host Bus
Adapter BIOS
Enabled,
Disabled
Disabled Disabling this setting disables the ROM BIOS on the 2600
Series Adapter, which frees space in upper memory. If you
are booting from a Fibre Channel disk drive attached to the
2600 Series Adapter, you must enable this setting. See
“Selectable Boot Settings” on page 39
ing the boot device.