Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If you use this command on a local VLT node, all multicast routes from the local
PIM TIB, the entire multicast route table, and all the entries in the data plane are
deleted. The local VLT node sends a request to the peer VLT node to download
multicast routes learned by the peer. Both local and synced routes are removed
from the local VLT node multicast route table. The peer VLT node clears synced
routes from the node.
If you use this command on a peer VLT node, only the synced routes are deleted
from the multicast route table.
debug ip pim
View IP PIM debugging messages.
Syntax
debug ip pim [bsr | events | group | packet [in | out] |
register | state | timer [assert | hello | joinprune |
register]]
To disable PIM debugging, use the
no debug ip pim
command or use the
undebug all
to disable all the debugging commands.
Parameters
bsr
(OPTIONAL) Enter the keyword
bsr
to view PIM Candidate
RP/BSR activities.
events
(OPTIONAL) Enter the keyword
group
to view PIM messages
for a specific group.
group
(OPTIONAL) Enter the keyword
group
to view PIM messages
for a specific group.
packet [in | out]
(OPTIONAL) Enter the keyword
packet
to view PIM packets.
Enter one of the optional parameters:
•
in
: to view incoming packets
•
out
: to view outgoing packets
register
(OPTIONAL) Enter the keyword
register
to view PIM
register address in dotted decimal format (A.B.C.D).
state
(OPTIONAL) Enter the keyword
state
to view PIM state
changes.
1014
PIM-Sparse Mode (PIM-SM)
