show ip pim neighbor
View PIM neighbors.
Syntax
show ip pim neighbor
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the
show ip pim neighbor
command shown in the
following example.
Field
Description
Neighbor address
Displays the IP address of the PIM neighbor.
Interface
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), on which the PIM neighbor was
found.
Uptime/expires
Displays the amount of time the neighbor has been up then
the amount of time until the neighbor is removed from the
multicast routing table (that is, until the neighbor hold time
expires).
Ver
Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode
Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use the
ip pim
dr-priority
command)
• DR = Designated Router
• S = Sparse mode
Example
Dell#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.3.4 Gi 7/16 09:44:58/00:01:24 v2 1 / S
Dell#
show ip pim rp
View all multicast groups-to-RP mappings.
Syntax
show ip pim rp [mapping |
group-address
]
PIM-Sparse Mode (PIM-SM)
1025