conflict option usage: 0
A.B.C.D option usage: 0
server option usage: 0
statistics option usage: 0
snooping option usage: 0
binding option usage: 0
clear ip fib command usage:4
clear ip route command usage:1
Dell#
show cpu-traffic-stats
View the CPU traffic statistics.
Syntax
show cpu-traffic-stats [
port number
| all]
Parameters
port number
(OPTIONAL) Enter the port number to display traffic statistics
on that port only. The range is from 1 to 1568.
all
(OPTIONAL) Enter the keyword
all
to display traffic
statistics on all the interfaces receiving traffic, sorted based
on the traffic.
Defaults
all
Command
Modes
EXEC
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Traffic statistics are sorted on a per-interface basis; the interface receiving the most
traffic is displayed first. All CPU and port information is displayed unless a specific
port or CPU is specified. Traffic information is displayed for router ports only; not
for management interfaces. The traffic statistics are collected only after the
debug
cpu-traffic-stats
command is executed; not from the system bootup.
NOTE: After debugging is complete, use the
no debug cpu-traffic-
stats
command to shut off traffic statistics collection.
Example
Dell#show cpu-traffic-stats
Processor : CP
--------------
Received 100% traffic on TenGigabitEthernet 8/2 Total
packets:100
LLC:0, SNAP:0, IP:100, ARP:0, other:0
Unicast:100, Multicast:0, Broadcast:0
Dell#
Control and Monitoring
103