• For a port channel interface, enter the keyword
LAG
then
port channel and the port-channel id .
interface
Enter the one of the following keywords and slot/port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface enter the keyword
VLAN
followed by
a number from 1 to 4094.
• For a port channel interface, enter the keyword
LAG
then
port channel and the port-channel id .
direction {rx | tx
| both}
Enter the keyword
direction
then one of the packet
directional indicators.
•
rx
: to monitor receiving packets only.
•
tx
: to monitor transmitting packets only.
•
both
: to monitor both transmitting and receiving
packets.
Defaults
none
Command
Modes
MONITOR SESSION (conf-mon-
sess-session-ID
)
Command
History
Version 9.4(0.0)
Added support for Source and destination.
Version 8.3.16.1
Introduced on the M I/O Aggregator.
Example
Dell# monitor session 0
source Port-channel 10 destination TenGigabitEthernet 0/33
direction tx
Port Monitoring
1049