switchport mode private-vlan
— sets PVLAN mode of the selected port.
private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
Syntax
[no] private-vlan mapping secondary-vlan
vlan-list
To remove specific secondary VLANs from the configuration, use the
no
private-vlan mapping secondary-vlan
vlan-list
command syntax.
Parameters
vlan-list
Enter the list of secondary VLANs to associate with the
selected primary VLAN. The list can be in comma-delimited
or hyphenated-range format, following the convention for
the range input.
Defaults
none
Command
Modes
INTERFACE VLAN
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
private-vlan mode
— sets the mode of the selected VLAN to community, isolated,
or primary.
show interfaces private-vlan
— displays the type and status of the PVLAN
interfaces.
show vlan private-vlan
— displays the PVLANs and/or interfaces that are part of a
PVLAN.
show vlan private-vlan mapping
— displays the primary-secondary VLAN mapping.
switchport mode private-vlan
— sets PVLAN mode of the selected port.
1052
Private VLAN (PVLAN)