Parameters
queue-id
Enter the value used to identify a queue. The range is from 0
to 3 (four queues per interface; four queues are reserved for
control traffic).
class-map
class-map-
name
(OPTIONAL) Enter the keyword
class-map
then the class
map name assigned to the queue in character format (32
character maximum).
NOTE: This option is available under
policy-map-
input
only.
qos-policy
qos-policy-
name
(OPTIONAL) Enter the keywords
qos-policy
then the QoS
policy name assigned to the queue in text format (32
characters maximum). This specifies the input QoS policy
assigned to the queue under
policy-map-input
and
output QoS policy under
policy-map-output
context.
Defaults
none
Command
Modes
CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command
History
Version 9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
There are four queues per interface on the MXL switch. This command assigns a
class map or QoS policy to different queues.
Related
Commands
service-policy output
— applies an output policy map to the selected interface.
set
Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.
Syntax
set {ip-dscp
value
| mac-dot1p
value
}
Parameters
ip-dscp
value
(OPTIONAL) Enter the keywords
ip-dscp
then the IP DSCP
value. The range is from 0 to 63.
mac-dot1p
value
Enter the keywords
mac-dot1p
then the dot1p value. The
range is from 0 to 7.
Defaults
none
Command
Modes
CONFIGURATION (conf-qos-policy-in)
Quality of Service (QoS)
1095
