distribute-list in
Configure a filter for incoming routing updates.
Syntax
distribute-list
prefix-list-name
in [
interface
]
To delete the filter, use the
no distribute-list
prefix-list-name
in
command.
Parameters
prefix-list-
name
Enter the name of a configured prefix list.
interface
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN, enter the keyword
vlan
then a number from
1 to 4094.
Defaults
Not configured.
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
ip prefix-list
— enters PREFIX-LIST mode and configures a prefix list.
distribute-list out
Configure a filter for outgoing routing updates.
Syntax
distribute-list
prefix-list-name
out [
interface
| bgp |
connected | ospf | static]
To delete the filter, use the
no distribute-list
prefix-list-name
out
command.
Parameters
prefix-list-
name
Enter the name of a configured prefix list.
interface
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
Routing Information Protocol (RIP)
1117