To remove a specified RMON history group of statistics collection, use the
no
rmon collection history {controlEntry
integer
}
command.
Parameters
controlEntry
integer
Enter the keyword
controlEntry
to specify the RMON
group of statistics using a value. Then enter an integer value
from 1 to 65535 that identifies the RMON group of statistics.
The integer value must be a unique index in the RMON
history table.
owner
name
(OPTIONAL) Enter the keyword
owner
then the owner name
to record the owner of the RMON group of statistics.
buckets
number
(OPTIONAL) Enter the keyword
buckets
then the number of
buckets for the RMON collection history group of statistics.
The bucket range is from 1 to 1000. The default is
50
.
interval
seconds
(OPTIONAL) Enter the keyword
interval
then the number
of seconds in each polling cycle. The range is from 5 to 3600
seconds. The default is
1800 seconds
.
Defaults
none
Command
Modes
CONFIGURATION INTERFACE (config-if)
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
rmon collection statistics
Enable RMON MIB statistics collection on an interface.
Syntax
rmon collection statistics {controlEntry
integer
} [owner
name
]
To remove RMON MIB statistics collection on an interface, use the
no rmon
collection statistics {controlEntry
integer
}
command.
Parameters
controlEntry
integer
Enter the keyword
controlEntry
to specify the RMON
group of statistics using a value. Then enter an integer value
from 1 to 65535 that identifies the RMON Statistic Table. The
integer value must be a unique in the RMON statistic table.
owner
name
(OPTIONAL) Enter the keyword
owner
then the owner name
to record the owner of the RMON group of statistics.
Defaults
none
Command
Modes
CONFIGURATION INTERFACE (config-if)
1132
Remote Monitoring (RMON)
