ip ssh rekey
Configures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key
during an SSH session.
Syntax
ip ssh rekey [time
rekey-interval
] [volume
rekey-limit
]
To reset to the default, use
no ip ssh rekey [time
rekey-interval
]
[volume
rekey-limit
]
command.
Parameters
time
minutes
Enter the keywords
time
then the amount of time in
minutes. The range is from 10 to 1440 minutes. The default is
60
minutes
volume
rekey-
limit
Enter the keywords
volume
then the amount of volume in
megabytes. The range is from 1 to 4096 to megabytes. The
default is
1024 megabytes
Defaults
The default time is
60
minutes. The default volume is
1024
megabytes.
Command
Modes
CONFIGURATION mode
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Introduced on the Z9000, S6000, S4820T, S4810, MXL
ip ssh rhostsfile
Specify the rhost file used for host-based authorization.
Syntax
ip ssh rhostsfile {
WORD
}
Parameters
WORD
Enter the rhost file name for the host-based authentication.
Defaults
none
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Security
1189
