Related
Commands
snmp-server group
— configures an SNMP server group.
show snmp user
Display the information configured on each SNMP user name.
Syntax
show snmp user
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
Dell#
snmp ifmib ifalias long
Display the entire description string through the Interface MIB, which would be truncated otherwise to 63
characters.
Syntax
snmp ifmib ifalias long
Defaults
Interface description truncated beyond 63 characters.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Example
!----command run on host connected to switch:------!
> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i
alias | more
IF-MIB::ifAlias.134530304 = STRING: This is a port connected
to Router2. This is a
port connected to
IF-MIB::ifAlias.134792448 = STRING:
!----command run on Force10 switch:-----------!
Dell#snmp ifmib ifalias long
!----command run on server connected to switch:------!
1224
Simple Network Management Protocol (SNMP) and Syslog