stack-unit provision
Preconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that is
executed on the management unit.
Syntax
stack-unit
0–5
] provision {
MXL-10/40GbE
}
Parameters
0–5
Enter a stack member identifier, from 0 to 5, of the switch
that you want to add to the stack.
MXL-10/40GbE
Enter the model identifier of the switch to be added as a
stack member. This identifier is also referred to as the
provision type
.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
•
reload
— reboots the system.
•
show system
— displays the status of all stack members or a specific member.
stack-unit renumber
Change the stack member ID of any stack member or a stand-alone unit.
Syntax
stack-unit
0-5
renumber
0-11
Parameters
0-5
The first instance of this value is the stack member unit
identifier, from 0 to 5, of the switch that you want add to the
stack.
The second instance of this value is the desired new unit
identifier number.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
You can renumber any switch, including the management unit or a stand-alone
unit.
You cannot renumber a unit to a number of an active member in the stack.
1262
Stacking
