hello-time
Set the time interval between generation of the spanning tree bridge protocol data units (BPDUs).
Syntax
hello-time
seconds
To return to the default value, use the
no hello-time
command.
Parameters
seconds
Enter a number as the time interval between transmission of
BPDUs. The range is from 1 to 10. The default is
2 seconds
.
Defaults
2 seconds
Command
Modes
SPANNING TREE
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
forward-delay
— changes the wait time before STP transitions to the Forwarding
state.
max-age
— changes the wait time before STP refreshes protocol configuration
information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
spanning tree bridge.
Syntax
max-age
seconds
To return to the default values, use the
no max-age
command.
Parameters
seconds
Enter a number of seconds the system waits before
refreshing configuration information. The range is from 6 to
40. The default is
20 seconds
.
Defaults
20 seconds
Command
Modes
SPANNING TREE
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
forward-delay
— changes the wait time before STP transitions to the Forwarding
state.
Spanning Tree Protocol (STP)
1273
