60
Virtual Router Redundancy Protocol
(VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking Operating System (OS) for
IPv4 and IPv6.
The following commands apply to both VRRP IPv4 and IPv6:
• advertise-interval
• description
• disable
• hold-time
• preempt
• priority
• show config
• track
• virtual-address
VRRP Ipv6 are in the
VRRP for IPv6 Commands
section.
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval {
seconds
| centisecs
centisecs
}
To return to the default settings, use the
no advertise-interval
command.
Parameters
seconds
Enter a number of seconds. The range is from 1 to 255. The
default is
1 second
.
centisecs
centisecs
Enter the keyword
centisecs
followed by the number of
centisecs in multiple of 25 centisecs. The range is
25
to
4075
centisecs in multiples of
25
centisecs.
Defaults
1 second or 100 centisecs
Command
Modes
INTERFACE-VRRP
Command
History
Version 9.5(0.0)
Introduced the support for centisecs on the MXL 10/40GbE
Switch .
Virtual Router Redundancy Protocol (VRRP)
1345
