Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Dell Networking OS recommends keeping the default setting for this command. If
you do change the time interval between VRRP advertisements on one router,
change it on all routers.
authentication-type
Enable authentication of VRRP data exchanges.
Syntax
authentication-type simple [
encryption-type
]
password
To delete an authentication type and password, use the
no authentication-
type
command.
Parameters
simple
Enter the keyword
simple
to specify simple authentication.
encryption-
type
(OPTIONAL) Enter one of the following numbers:
•
0
(zero) specifies an un-encrypted authentication data
follows.
•
7
(seven) specifies a hidden authentication data follows.
password
Enter a character string up to eight characters long as a
password. If you do not enter an encryption-type, the
password is stored as clear text.
Defaults
Not configured.
Command
Modes
VRRP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The given password is encrypted by the system and the
show config
displays an
encrypted text string for any of the encrypted typed used.
clear counters vrrp
Clear the counters maintained on VRRP operations.
Syntax
clear counters vrrp [
vrrp-id
]
Parameters
vrrp-id
(OPTIONAL) Enter the number of the VRRP group ID. The
range is from 1 to 255.
1346
Virtual Router Redundancy Protocol (VRRP)
