iscsi priority-bits
Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.
Syntax
iscsi priority-bits
priority-bitmap
To remove the configured iSCSI priority, use the
no iscsi priority-bits
command.
Parameters
priority-bitmap
Enter the priority-bitmap range. The range is from 1 to FF.
Defaults
0x10
Command
Modes
PROTOCOL LLDP
Command
History
Version 9.3.0.0
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch
Usage
Information
This command is available at the global level only.
show interface dcbx detail
Displays the DCBX configuration on an interface.
Syntax
show interface
port-type slot/port
dcbx detail
Parameters
port-type
Enter the port type.
slot/port
Enter the slot/port number.
Command
Modes
CONFIGURATION
Command
History
Version 9.3.0.0
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch.
Usage
Information
To clear DCBX frame counters, use the
clear dcbx counters interface
stack-unit/port
command.
The following describes the
show interface dcbx detail
command shown in
the following example.
Field
Description
Interface
Interface type with chassis slot and port number.
Port-Role
Configured the DCBX port role: auto-upstream, auto-
downstream, config-source, or manual.
1382
FC Flex IO Modules