6
Access Control Lists (ACL)
Access control lists (ACLs) are supported by the Dell Networking Operating System (OS).
The Dell Networking OS supports the following types of ACL, IP prefix list, and route maps:
•
Commands Common to all ACL Types
•
Common IP ACL Commands
•
Standard IP ACL Commands
•
Extended IP ACL Commands
•
Common MAC Access List Commands
•
Standard MAC ACL Commands
•
Extended MAC ACL Commands
•
IP Prefix List Commands
•
Route Map Commands
NOTE: For ACL commands that use the Trace function, refer to the
Secure DHCP Commands
section in the
Security
chapter.
Commands Common to all ACL Types
The following commands are available within each ACL mode and do not have mode-specific options.
Some commands in this chapter may use similar names, but require different options to support the
different ACL types (for example, the
deny
command).
description
Configure a short text string describing the ACL.
Syntax
description
text
Parameters
text
Enter a text string up to 80 characters long.
Defaults
Not enabled.
Command
Modes
• CONFIGURATION-IP ACCESS-LIST-STANDARD
• CONFIGURATION-IP ACCESS-LIST-EXTENDED
• CONFIGURATION-MAC ACCESS LIST-STANDARD
• CONFIGURATION-MAC ACCESS LIST-EXTENDED
140
Access Control Lists (ACL)