6 0 0 0
7 0 0 0
show qos dcb-input
Displays the PFC configuration in a DCB input policy.
Syntax
show qos dcb-input [
pfc-profile
]
Parameters
pfc-profile
Enter the PFC profile.
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.0)
Introduced on the FC Flex IO module installed in the MXL
10/40GbE Switch.
Example
Dell(conf)# show qos dcb-input
dcb-input pfc-profile
pfc link-delay 32
pfc priority 0-1
dcb-input pfc-profile1
no pfc mode on
pfc priority 6-7
show stack-unit stack-ports pfc details
Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC Operational
mode on each unit with the configured priorities, link delay, and number of pause packets sent and
received.
Syntax
show stack-unit {all |
stack-unit
} stack-ports {all |
port-
number
} pfc details
Parameters
stack-unit
Enter the stack unit.
port-number
Enter the port number.
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.0)
Introduced on the FC Flex IO module installed in the MXL
10/40GbE Switch.
Example
Dell(conf)# show stack-unit all stack-ports all pfc details
stack unit 0 stack-port all
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
FC Flex IO Modules
1403
