snmp-server enable traps
Enable SNMP traps.
Syntax
snmp-server enable traps [
notification-type
] [
notification-
option
]
To disable traps, use the
no snmp-server enable traps [
notification-
type
] [
notification-option
]
command.
Parameters
notification-
type
Enter the type of notification from the following list:
•
bgp
— Notification of changes in the BGP process.
•
config
— Notification of changes to the startup or
running configuration.
•
ecfm
— Notification of changes to ECFM.
•
ecmp
— Enable an ECMP trap to notify of ECMP or link
bundle traffic imbalances.
•
envmon
— For Dell Networking device notifications when
an environmental threshold is exceeded.
•
isis
— Notification of intermediate service traps.
•
lacp
— Notification of changes.
•
snmp
— Notification of RFC 1157 traps.
•
stp
— Notification of a state change in the spanning tree
protocol (RFC 1493).
•
vlt
— Notification of virtual link trunking.
•
vrrp
— Notification of a state change in a VRRP group.
•
xstp
— Notification of a state change in MSTP (802.1s),
RSTP (802.1w), and PVST+.
notification-
option
For the
envmon
notification-type, enter one of the following
optional parameters:
•
cam-utilization
•
fan
•
supply
•
temperature
For the
snmp
notification-type, enter one of the following
optional parameters:
•
authentication
•
coldstart
•
linkdown
•
linkup
Defaults
Not enabled.
1532
PMUX Mode of the MXL 10/40GbE Switch I/O Module