traps
(OPTIONAL) Enter the keyword
traps
to send trap
notifications to the specified host. The default is
traps
.
informs
(OPTIONAL) Enter the keyword
informs
to send inform
notifications to the specified host. The default is
traps
.
version 1 | 2c |
3
(OPTIONAL) Enter the keyword version to specify the
security model then the security model version number
1
,
2c
, or
3
:
• Version
1
is the least secure version.
• Version
3
is the most secure of the security modes.
• Version
2c
allows transmission of informs and counter
64, which allows for integers twice the width of what is
normally allowed.
The default is version
1
.
auth
(OPTIONAL) Enter the keyword
auth
to specify
authentication of a packet without encryption.
noauth
(OPTIONAL) Enter the keyword
noauth
to specify no
authentication of a packet.
priv
(OPTIONAL) Enter the keyword
priv
to specify both
authentication and then scrambling of the packet.
community-
string
Enter a text string (up to 20 characters long) as the name of
the SNMP community.
NOTE: For version 1 and version 2c security models, this
string represents the name of the SNMP community. The
string can be set using this command; however, Dell
Networking OS recommends setting the community
string using the
snmp-server community
command
before executing this command. For version 3 security
model, this string is the USM user security name.
udp-port
port-
number
(OPTIONAL) Enter the keywords
udp-port
followed by the
port number of the remote host to use. The range is from 0
to 65535. The default is
162
.
notification-
type
(OPTIONAL) Enter one of the following keywords for the
type of trap to be sent to the host:
•
bgp
— Enable BGP state change traps.
•
ecfm
— Enable ECFM state change traps.
•
entity
— Enable entity change traps.
•
envmon
— Enable SNMP environmental monitor traps.
•
eoam
— Enable EOAM state change traps
•
ets
— Enable ets traps
•
fips
— Enable FIP Snooping state change traps
•
lacp
— Enable LACP state change traps.
1534
PMUX Mode of the MXL 10/40GbE Switch I/O Module