Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
E-Series legacy
command
Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost.
Increasing the buffer size does not affect messages stored in the buffer.
Related
Commands
clear logging
— clears the logging buffer.
show logging
— displays the logging setting and system messages in the internal
buffer.
logging console
Specify which messages are logged to the console.
Syntax
logging console [
level
]
To return to the default values, use the
default logging console
command.
To disable logging to the console, use the
no logging console
command.
Parameters
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the
following parameters:
emergencies
,
alerts
,
critical
,
errors
,
warnings
,
notifications
,
informational
, or
debugging
. The default is
7
or
debugging
.
Defaults
level =
7
; size =
debugging
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
PMUX Mode of the MXL 10/40GbE Switch I/O Module
1539
