Parameters
ip-prefix
Specify an IP prefix in the network/length format. For
example, 35.0.0.0/ 8 means match the first 8 bits of address
35.0.0.0.
ge
min-prefix-
length
(OPTIONAL) Enter the keyword
ge
and then enter the
minimum prefix length, which is a number from zero (0) to
32.
le
max-prefix-
length
(OPTIONAL) Enter the keyword
le
and then enter the
maximum prefix length, which is a number from zero (0) to
32.
Defaults
Not configured.
Command
Modes
PREFIX-LIST
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Sequence numbers for this filter are automatically assigned starting at sequence
number 5.
If you do not use the
ge
or
le
options, only packets with an exact match to the
prefix are filtered.
Related
Commands
permit
— configures a filter to pass packets.
seq
— configures a drop or permit filter with a specified sequence number.
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
Syntax
ip prefix-list
prefix-name
Parameters
prefix-name
Enter a string up to 16 characters long as the name of the
prefix list, up to 140 characters long.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
196
Access Control Lists (ACL)