Parameters
prefix-list-
name
Enter the name of configured prefix list, up to 140
characters.
Defaults
Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
match interface
— redistributes routes that match the next-hop interface.
match ip next-hop
— redistributes routes that match the next-hop IP address.
match ip route-source
— redistributes routes that match routes advertised by other
routers.
match metric
— redistributes routes that match a specific metric.
match route-type
— redistributes routes that match a route type.
match tag
— redistributes routes that match a specific tag.
match ip next-hop
To match based on the next-hop IP addresses specified in an IP access list or IP prefix list, configure a
filter.
Syntax
match ip next-hop {access-list | prefix-list
prefix-list-name
}
Parameters
access-list-
name
Enter the name of a configured IP access list, up to 140
characters.
prefix-list
prefix-list-
name
Enter the keywords
prefix-list
and then enter the name
of configured prefix list, up 10 140 characters.
Defaults
Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
match interface
— redistributes routes that match the next-hop interface.
match ip address
— redistributes routes that match an IP address.
Access Control Lists (ACL)
203