Usage
Information
When you enable a BFD session with a specified BGP neighbor or peer group using
the
bfd neighbor
command, the default BFD session parameters are used
(interval:
100
milliseconds, min_rx:
100
milliseconds, multiplier:
3
packets, and
role:
active
) if you have not specified parameters with the
bfd neighbor
command.
When you explicitly enable a BGP neighbor for a BFD session with the
bfd
neighbor
command:
• The neighbor does not inherit the global BFD enable values configured with the
bfd neighbor
command or configured for the peer group to which the
neighbor belongs.
• The neighbor only inherits the global timer values configured with the
bfd
neighbor
command: interval, min_rx, and multiplier.
Related
Commands
bfd neighbor
— enables BFD sessions with all neighbors the Layer 3 protocols
discover.
neighbor bfd disable
— explicitly disables a BFD session with a BGP neighbor or a
BGP peer group.
show bfd neighbors
— displays the BFD neighbor information on all interfaces or a
specified interface.
neighbor bfd disable
Explicitly disable a BFD session with a BGP neighbor or a BGP peer group.
Syntax
neighbor {
ip-address
|
peer-group-name
} bfd disable
Parameters
ip-address
Enter the IP address of the BGP neighbor that you want to
explicitly disable for BFD sessions in dotted decimal format
(A.B.C.D).
peer-group-
name
Enter the name of the peer group that you want to explicitly
disable for BFD sessions.
Defaults
none
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
When you explicitly disable a BGP neighbor for a BFD session with the
neighbor
bfd disable
command:
306
Bidirectional Forwarding Detection (BFD)