Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
bgp add-path
— allows the advertisement of multiple paths for the same address
prefix without the new paths implicitly replacing any previous ones.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {
ip-address
|
peer-group-name
} advertisement-interval
seconds
To return to the default value, use the
no neighbor {
ip-address
|
peer-
group-name
} advertisement-interval
command.
Parameters
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
seconds
Enter a number as the time interval, in seconds, between
BGP advertisements. The range is from 0 to 600 seconds.
The default is
5 seconds
for internal BGP peers and
30
seconds
for external BGP peers.
Defaults
• seconds =
5 seconds
(internal peers)
• seconds =
30 seconds
(external peers)
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
neighbor advertisement-start
To send BGP routing updates, set the minimum interval before starting.
Syntax
neighbor {
ip-address
} advertisement-start
seconds
To return to the default value, use the
no neighbor {
ip-address
}
advertisement-start
command.
Border Gateway Protocol IPv4 (BGPv4)
339