neighbor default-originate
Inject the default route to a BGP peer or neighbor.
Syntax
neighbor {
ip-address
|
peer-group-name
} default-originate
[route-map
map-name
]
To remove a default route, use the
no neighbor {
ip-address
|
peer-
group-name
} default-originate
command.
Parameters
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-
name
Enter the name of the peer group to set the default route of
all routers in that peer group.
route-map
map-name
(OPTIONAL) Enter the keyword
route-map
then the name
of a configured route map.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If you apply a route map to a BGP peer or neighbor with the
neighbor default-
originate
command configured, the software does not apply the set filters in the
route map to that BGP peer or neighbor.
neighbor description
Assign a character string describing the neighbor or group of neighbors (peer group).
Syntax
neighbor {
ip-address
|
peer-group-name
} description
text
To delete a description, use the
no neighbor {
ip-address
|
peer-group-
name
} description
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group.
text
Enter a continuous text string up to 80 characters.
Defaults
Not configured.
Border Gateway Protocol IPv4 (BGPv4)
341