NOTE: Enter an escape sequence (CTRL+v) prior to
entering the
?
regular expression.
•
[ ]
= (brackets) a range of single-character patterns.
•
( )
= (parenthesis) groups a series of pattern elements
to a single element.
•
{ }
= (braces) minimum and the maximum match count.
•
^
= (caret) the beginning of the input string. If you use
the caret at the beginning of a sequence or range, it
matches on everything BUT the characters specified.
•
$
= (dollar sign) the end of the output string.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the
show ip bgp regexp
command shown in the
following example.
Field
Description
Network
Displays the destination network prefix of each BGP route.
Next Hop
Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then non-BGP routes exist in the
router’s routing table.
Metric
Displays the BGP router’s metric, if assigned.
LocPrf
Displays the BGP LOCAL_PREF attribute for the route.
Weight
Displays the route’s weight
Path
Lists all the AS paths the route passed through to reach the
destination network.
Example
(S4810)
Dell#show ip bgp regexp ^2914+
BGP table version is 3700481, local router ID is 63.114.8.35
Status codes: s suppressed, S stale, d damped, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*>I 3.0.0.0/8 1.1.1.2 0 100 0 2914 1239 80
i
*>I 4.0.0.0/8 1.1.1.2 0 100 0 2914 3356 i
*>I 4.17.225.0/24 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.226.0/23 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.251.0/24 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.252.0/23 1.1.1.2 0 100 0 2914 11853
388
Border Gateway Protocol IPv4 (BGPv4)