command), BGP sends a route-refresh request to the neighbor and receives all of
the peer’s updates.
Related
Commands
clear ip bgp
— activates inbound policies without resetting the BGP TCP session.
clear ip bgp ipv6 unicast soft
Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform
BGP soft reconfiguration.
Syntax
clear ip bgp {* |
as-number
|
ipv4-neighbor-addr
|
ipv6-
neighbor-addr
|
peer-group name
} ipv6 unicast soft [in | out]
Parameters
*
Clear and reapply an asterisk ( * ) for all BGP sessions.
as-number
Clear and reapply policies for all neighbors belonging to the
AS. The range is from 0 to 65535 (2 Byte), from 1 to
4294967295 (4 Byte), or from 0.1 to 0.65535.65535 (Dotted
format).
ipv4-neighbor-
addr
|
ipv6-
neighbor-addr
Clear and reapply policies for a neighbor.
peer-group
name
Clear and reapply policies for all BGP routers in the specified
peer group.
ipv6 unicast
soft
Clear and reapply policies for all IPv6 unicast routes.
in
Reapply only inbound policies.
NOTE: If you enter
soft
, without an
in
or
out
option,
both inbound and outbound policies are reset.
out
Reapply only outbound policies.
NOTE: If you enter
soft
, without an
in
or
out
option,
both inbound and outbound policies are reset.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Border Gateway Protocol IPv4 (BGPv4)
399