Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Entering <CR> after the
clear ip dhcp binding
command clears all the IPs
from the binding table.
debug ip dhcp server
Display the Dell Networking OS debugging messages for DHCP.
Syntax
debug ip dhcp server [events | packets]
Parameters
events
Enter the keyword
events
to display the DHCP state
changes.
packet
Enter the keyword
packet
to display packet transmission/
reception.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
default-router
Assign a default gateway to clients based on the address pool.
Syntax
default-router
address
[
address2...address8
]
Parameters
address
Enter a list of routers that may be the default gateway for
clients on the subnet. You may specify up to eight routers.
List them in order of preference.
Defaults
none
Command
Modes
DHCP <POOL>
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Dynamic Host Configuration Protocol (DHCP)
485