•
Fast Ethernet interface
: enter the keyword
FastEthernet
then the slot/port information.
•
Port Channel interface
: enter the keyword
port-
channel
then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface
: enter the keyword
TenGigabitEthernet
then the slot/port information
•
40-Gigabit Ethernet interface
: enter the keyword
fortyGigE
then the slot/port information
secondary
interface
Enter the keyword
secondary
to configure the secondary
interface then one of the following interfaces and slot/port
information:
•
Fast Ethernet interface
: enter the keyword
FastEthernet
then the slot/port information.
•
Port Channel interface
: enter the keyword
port-
channel
then a number. The range is from 1 to 128.
•
10-Gigabit Ethernet interface
: enter the keyword
TenGigabitEthernet
then the slot/port information
•
40-Gigabit Ethernet interface
: enter the keyword
fortyGigE
then the slot/port information
control-vlan
vlan-id
Enter the keyword
control-vlan
then the VLAN ID. The
range is from 1 to 4094.
Defaults
none
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command causes the Ring Manager to take ownership of the two ports after
IFM validates the configuration. Ownership is relinquished for a port only when the
interface does not play a part in any control VLAN, that is, the interface does not
belong to any ring.
Related
Commands
show frrp
— displays the resilient ring protocol configuration information.
member-vlan
Specify the member VLAN identification numbers.
Syntax
member-vlan {
vlan-range
}
To return to the default, use the
no member-vlan [
vlan-range
]
command.
530
Force10 Resilient Ring Protocol (FRRP)