Parameters
vlan-range
Enter the member VLANs using VLAN IDs (separated by
commas), a range of VLAN IDs (separated by a hyphen), a
single VLAN ID, or a combination. For example: VLAN IDs
(comma-separated): 3, 4, 6. Range (hyphen-separated):
5-10. Combination: 3, 4, 5-10, 8.
Defaults
none
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
mode
Set the Master or Transit mode of the ring.
Syntax
mode {master | transit}
To reset the mode, use the
no mode {master | transit}
command.
Parameters
master
Enter the keyword
master
to set the Ring node to Master
mode.
transit
Enter the keyword
transit
to set the Ring node to Transit
mode.
Defaults
Mode None
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
protocol frrp
Enter the Resilient Ring Protocol and designate a ring identification.
Syntax
protocol frrp {
ring-id
}
To exit the ring protocol, use the
no protocol frrp {
ring-id
}
command.
Parameters
ring-id
Enter the ring identification number. The range is from 1 to
255.
Force10 Resilient Ring Protocol (FRRP)
531