vrrp [vrf
instance
]
(OPTIONAL) Enter the keyword
vrrp
to clear the counters of
all VRRP groups. To clear the counters of VRRP groups in a
specified VRF instance, enter the name of the instance (32
characters maximum).
learning-limit
(OPTIONAL) Enter the keywords
learning-limit
to clear
unknown source address (SA) drop counters when MAC
learning limit is configured on the interface.
Defaults
Without an interface specified, the command clears all interface counters.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#clear counters
Clear counters on all interfaces [confirm]
Related
Commands
mac learning-limit — allows aging of MACs even though a learning-limit is
configured or disallow station move on learned MACs.
show interfaces
— displays information on the interfaces.
clear dampening
Clear the dampening counters on all the interfaces or just the specified interface.
Syntax
clear dampening [
interface
]
Parameters
interface
(OPTIONAL) Enter any of the following keywords and slot/
port or number to clear counters from a specified interface:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
Defaults
Without an interface specified, the command clears all interface dampening
counters.
554
Interfaces
