Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To clear Layer 3 CAM inconsistencies, use this command.
CAUTION: Executing this command causes traffic disruption.
Related
Commands
show ip fib stack-unit
— shows FIB entries.
clear ip route
Clear one or all routes in the routing table.
Syntax
clear ip route {* |
ip-address mask
}
Parameters
*
Enter an asterisk (*) to clear all learned IP routes.
ip-address
mask
Enter a specific IP address and mask in dotted decimal
format to clear that IP address from the routing table.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
ip route
— assigns an IP route to the switch.
show ip route
— views the routing table.
show ip route summary
— views a summary of the routing table.
clear tcp statistics
Clear TCP counters.
Syntax
clear tcp statistics
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
IPv4 Routing
617
