Parameters
interface
interface
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For the Management interface, enter the keyword
managementethernet
then the slot/port information.
• For a Port Channel interface, enter the keyword
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN, enter the keyword
vlan
then a number from
1 to 4094.
ip
ip-address
mask
(OPTIONAL) Enter the keyword
ip
then an IP address in the
dotted decimal format. Enter the optional IP address mask in
the slash prefix format (/ x).
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword
macaddress
then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
static
(OPTIONAL) Enter the keyword
static
to view entries
entered manually.
dynamic
(OPTIONAL) Enter the keyword
dynamic
to view dynamic
entries.
summary
(OPTIONAL) Enter the keyword
summary
to view a summary
of ARP entries.
Command
Modes
EXEC Privilege
Command
History
Version 9.4.0.0
Added usage information for Clear arp-cache.
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following example shows two VLANs that are associated with a private VLAN
(PVLAN) (refer to
Private VLAN (PVLAN)
.
If you have entered the
'clear arp-cache'
command to remove a large
number of ARP entries and the command is still being processed in the
background, an error message is displayed as follows if you attempt to enter the
'show arp’
command:
"Clear arp in-progress.Please try after
sometime!
The following describes the
show arp
command shown in the following example.
Row Heading
Description
Protocol
Displays the protocol type.
636
IPv4 Routing
