Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
ipv6 flowlabel-zero
Configure system to set the flow label field in the packets to zero.
Syntax
ipv6 flowlabel-zero
To disable the 0 from being set in the field and allow the rotocol operations to fill
the field, use the
no ipv6 flowlabel-zero
command.
Default
Disabled
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If the flowlabel value is already set for BGP or SSH, the system defaults to the
already configured value. All packets on the same connection are considered part
of the same flow by the system. For new connections, set the new flowlabel to
zero.
ipv6 host
Assign a name and IPv6 address the host-to-IPv6 address mapping table uses.
Syntax
ipv6 host name
ipv6-address
To remove an IP host, use the
no ipv6 host name {ipv6–address}
.
Parameters
name
Enter a text string to associate with one IP address.
ipv6-address
Enter the IPv6 address (X:X:X:X::X) to be mapped to the
name.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Basics
677