Usage
Information
By default, when you create a neighbor/peer group configuration in the Router
BGP context, it is enabled for the IPv6/Unicast AFI/SAFI. By using
activate
in the
new context, the neighbor/peer group is enabled for AFI/SAFI.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {
ipv6-address
|
peer-group-name
} advertisement-
interval
seconds
To return to the default value, use the
no neighbor {
ipv6-address
|
peer-
group-name
} advertisement-interval
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
seconds
Enter a number as the time interval, in seconds, between
BGP advertisements. The range is from 0 to 600 seconds.
The default is
5 seconds
for internal BGP peers and
30
seconds
for external BGP peers.
Defaults
• seconds =
5 seconds
(internal peers)
• seconds =
30 seconds
(external peers)
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
neighbor allowas-in
Set the number of times an AS number can occur in the AS path.
Syntax
neighbor {
ip-address
|
peer-group-name
} allowas-in
number
To return to the default value, use the
no neighbor {
ip-address
|
peer-
group-name
} allowas-in
command.
722
IPv6 Border Gateway Protocol (IPv6 BGP)
