Defaults
threshold =
75
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If you configure the
neighbor maximum-prefix
command and the neighbor
receives more prefixes than allowed by the
neighbor maximum-prefix
command configuration, the neighbor goes down and the
show ip bgp ipv6
unicast summary
command displays (
prfxd
) in the State/PfxRcd column for that
neighbor. The neighbor remains down until you enter the
capture bgp-pdu
max-buffer-size
command for the neighbor or the peer group to which the
neighbor belongs or you enter
neighbor shutdown
and
neighbor no
shutdown
commands.
Related
Commands
show ip bgp ipv6 unicast summary
— displays the current BGP configuration.
neighbor X:X:X::X password
Enable TCP MD5 Authentication for an IPv6 BGP peer session.
Syntax
neighbor x:x:x::x password {7 <encrypt-pass> | <clear-pass}
To return to the default setting, use the
no neighbor x:x:x::x password
command.
Parameters
encrypt-pass
Enter the encrypted password.
clear-pass
Enter the clear text password.
Defaults
Disabled.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The TCP session is authentication and prevents the data from being compromised.
728
IPv6 Border Gateway Protocol (IPv6 BGP)
