Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast community
View information on all routes with community attributes or view specific BGP community groups.
Syntax
show ip bgp ipv6 unicast community [
community-number
] [local-
as] [no-export] [no-advertise]
Paramters
community-
number
Enter the community number in AA:NN format where AA is
the AS number (2 bytes) and NN is a value specific to that
autonomous system. You can specify up to eight community
numbers to view information on those community groups.
local-AS
Enter the keywords
local-AS
to view all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED. All
routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP
peers.
no-advertise
Enter the keywords
no-advertise
to view all routes
containing the well-known community attribute of
NO_ADVERTISE. All routes with the NO_ADVERTISE
(0xFFFFFF02) community attribute must not be advertised to
other BGP peers.
no-export
Enter the keywords
no-export
to view all routes containing
the well-known community attribute of NO_EXPORT. All
routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To view the total number of COMMUNITY attributes found, use the
show ip bgp
ipv6 unicast summary
command. The text line above the route table states the
number of COMMUNITY attributes found.
746
IPv6 Border Gateway Protocol (IPv6 BGP)
