Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast neighbors
Displays information on IPv6 unicast routes exchanged by BGP neighbors.
Syntax
show ip bgp ipv6 unicast neighbors [
ipv4-neighbor-addr
|
ipv6-
neighbor-addr
] [advertised-routes | dampened-routes | detail |
flap-statistics | routes | received-routes [
network
[
network-
mask
]] | denied-routes [
network
[
network-mask
]]]
Parameters
ipv6 unicast
Enter the keywords
ipv6 unicast
to view information only
related to IPv6 unicast routes.
ipv4-neighbor-
addr
|
ipv6-
neighbor-addr
(OPTIONAL) Enter the IP address of the neighbor to view
only BGP route information exchanged with that neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords
advertised-routes
to
view only the routes the neighbor sent.
dampened-
routes
(OPTIONAL) Enter the keywords
dampened-routes
to view
information on dampened routes from the BGP neighbor.
detail
(OPTIONAL) Enter the keyword
detail
to view neighbor-
specific internal information for the IPv4 Unicast address
family.
flap-statistics
(OPTIONAL) Enter the keywords
flap-statistics
to view
flap statistics on the neighbor’s routes.
routes
(OPTIONAL) Enter the keyword
routes
to view only the
neighbor’s feasible routes.
received-
routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords
received-routes
then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
received from neighbors.
NOTE: You must configure the
neighbor soft-
reconfiguration inbound
command prior to
viewing all the information received from the neighbors.
denied-routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords
denied-routes
then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
on routes denied using neighbor inbound filters.
750
IPv6 Border Gateway Protocol (IPv6 BGP)