Lines Beginning
With
Description
For address
family:
Displays IPv6 Unicast as the address family.
BGP table version
Displays which version of the primary BGP routing table the
router and the neighbor are using.
Prefixes accepted
Displays the number of network prefixes accepted by the
router and the amount of memory used to process those
prefixes.
Prefixes
advertised
Displays the number of network prefixes advertised, the
number rejected, and the number withdrawn from the BGP
routing table.
Connections
established
Displays the number of TCP connections established and
dropped between the two peers to exchange BGP
information.
Last reset
Displays the amount of time since the peering session was
last reset. Also states if the peer resets the peering session. If
the peering session was never reset, the word “never” is
displayed.
Local host:
Displays the peering address of the local router and the TCP
port number.
Foreign host:
Displays the peering address of the neighbor and the TCP
port number.
Example
Dell#show ip bgp ipv6 unicast neighbors
BGP neighbor is 5ffe:10::3, remote AS 1, external link
BGP version 4, remote router ID 5.5.5.3
BGP state ESTABLISHED, in this state for 00:00:32
Last read 00:00:32, last write 00:00:32
Hold time is 180, keepalive interval is 60 seconds
Received 1404 messages, 0 in queue
3 opens, 1 notifications, 1394 updates
6 keepalives, 0 route refresh requests
Sent 48 messages, 0 in queue
3 opens, 2 notifications, 0 updates
43 keepalives, 0 route refresh requests
Minimum time between advertisement runs is 30 seconds
Minimum time before advertisements start is 0 seconds
Capabilities received from neighbor for IPv6 Unicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
CISCO_ROUTE_REFRESH(128)
Capabilities advertised to neighbor for IPv6 Unicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
CISCO_ROUTE_REFRESH(128)
For address family: IPv6 Unicast
BGP table version 12, neighbor version 12
752
IPv6 Border Gateway Protocol (IPv6 BGP)