Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group.
prefix-list-
name
Enter the name of an established prefix list. If the prefix list is
not configured, the default is
permit
(to allow all routes).
in
Enter the keyword in to distribute only inbound traffic.
out
Enter the keyword out to distribute only outbound traffic.
Defaults
Not configured.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
neighbor filter-list
— assigns a AS-PATH list to a neighbor or peer group.
neighbor route-map
— assigns a route map to a neighbor or peer group.
neighbor filter-list
Configure a BGP filter based on the AS-PATH attribute.
Syntax
neighbor [
ipv6-address
|
peer-group-name
] filter-list aspath
access-list-name
[in | out]
To delete a BGP filter, use the
no neighbor [
ipv6-address
|
peer-group-
name
] filter-list aspath
access-list-name
[in | out]
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group to apply the filter to all
routers in the peer group.
access-list-
name
Enter the name of an established AS-PATH access list. If the
AS-PATH access list is not configured, the default is
permit
(to allow routes).
in
Enter the keyword
in
to filter inbound BGP routes.
768
IPv6 Border Gateway Protocol (IPv6 BGP)