ip router isis
Configure IS-IS routing processes on an interface and attach an area tag name to the routing process.
Syntax
ip router isis [
tag
]
To disable IS-IS on an interface, use the
no ip router isis [
tag
]
command.
Parameters
tag
(OPTIONAL) The tag you specify identifies a specific area
routing process. If you do not specify a tag, a null tag is
assigned.
Defaults
No processes are configured.
Command
Modes
INTERFACE
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To assign a network entity title to enable IS-IS, use the
net
command.
Related
Commands
•
net
— configures an IS-IS network entity title (NET) for the routing process.
•
router isis
— enables the IS-IS routing protocol.
ipv6 router isis
Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax
ipv6 router isis [
tag
]
To disable IS-IS routing, use the
no router isis [
tag
]
command.
Parameters
tag
(OPTIONAL) This parameter is a unique name for a routing
process. A null tag is assumed if the tag option is not
specified. The tag name must be unique for all IP router
processes for a given router.
Defaults
Not configured.
Command
Modes
ROUTER ISIS
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Configure a network entity title (the
net
command) to specify the area address and
the router system ID.
Intermediate System to Intermediate System (IS-IS)
809
