Usage
Information
Dell Networking recommends configuring metrics on all interfaces. Without
configuring this command, the IS-IS metrics are similar to hop-count metrics.
isis metric
Assign a metric to an interface.
Syntax
isis metric
default-metric
[level-1 | level-2]
To return to the default values, use the
no isis metric [
default-metric
]
[level-1 | level-2]
command.
Parameters
default-metric
Metric assigned to the link and used to calculate the cost
from each other router via the links in the network to other
destinations. You can configure this metric for Level 1 or
Level 2 routing. The range is from 0 to 63 for narrow and
transition metric styles and from 0 to 16777215 for wide
metric styles. The default is
10
.
level-1
(OPTIONAL) Enter the keywords
level-1
to configure the
shortest path first (SPF) calculation for Level 1 (intra-area)
routing. This setting is the default.
level-2
(OPTIONAL) Enter the keywords
level-2
to configure the
SPF calculation for Level 2 (inter-area) routing.
Defaults
default-metric =
10
;
level-1
(if not otherwise specified)
Command
Modes
INTERFACE
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Dell Networking recommends configuring metrics on all interfaces. Without
configuring this command, the IS-IS metrics are similar to hop-count metrics.
isis network point-to-point
Enable the software to treat a broadcast interface as a point-to-point interface.
Syntax
isis network point-to-point
To disable the feature, use the
no isis network point-to-point
command.
814
Intermediate System to Intermediate System (IS-IS)
