If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
Defaults
Refer to Parameters.
Command
Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
How a metric value assigned to a redistributed route is advertised depends on how
on the configuration of the
metric-style
command. If the
metric-style
command is set for Narrow mode and the metric value in the
redistribute
ospf
command is set to a number higher than 63, the metric value advertised in
LSPs is 63. If the
metric-style
command is set for wide mode, the metric value
in the
redistribute ospf
command is advertised.
router isis
Allows you to enable the IS-IS routing protocol and to specify an IP IS-IS process.
Syntax
router isis [
tag
]
To disable IS-IS routing, use the
no router isis [
tag
]
command.
Parameters
tag
(OPTIONAL) This is a unique name for a routing process. A
null tag is assumed if the
tag
option is not specified. The tag
name must be unique for all IP router processes for a given
router.
Defaults
Not configured.
Command
Modes
ROUTER ISIS
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Configure a network entity title (the
net
command) to specify the area address and
the router system ID.
Enable routing on one or more interfaces to establish adjacencies and establish
dynamic routing.
You can configure only one IS-IS routing process to perform Level 2 routing. A
level-1-2
designation performs Level 1 and Level 2 routing at the same time.
828
Intermediate System to Intermediate System (IS-IS)
