static
(OPTIONAL) Enter the keyword
static
to display only those
MAC addresses specifically configured on the switch.
Optionally, you can also add one of these combinations:
address/
mac-address
,
interface/
interface
, or
vlan
vlan-id
.
address
mac-
address
(OPTIONAL) Enter the keyword
address
then a MAC
address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
interface
interface
(OPTIONAL) Enter the keyword
interface
then the
interface type, slot and port information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
interface
interface-type
(OPTIONAL) Instead of entering the keyword
interface
then the interface type, slot and port information, as above,
you can enter the interface type, then just a slot number.
vlan
vlan-id
(OPTIONAL) Enter the keyword
vlan
then the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1
to 4094.
count
(OPTIONAL) Enter the keyword
count
, then optionally, by an
interface or VLAN ID, to display total or interface-specific
static addresses, dynamic addresses, and MAC addresses in
use.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the
show mac-address-table
command shown in the
following example.
Column Heading
Description
VlanId
Displays the VLAN ID number.
Mac Address
Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type
Lists whether the MAC address was manually configured
(Static), learned dynamically (Dynamic), or associated with a
specific port (Sticky).
Layer 2
853
