Parameters
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.)
list
name
Enter the keywords
list name
and specify a standard
access list that contains the RP address that should be
treated as the default peer. If no access list is specified, then
all SAs from the peer are accepted.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If a list is not specified, all SA messages received from the default peer are
accepted. You can enter multiple
default peer
commands.
ip msdp log-adjacency-changes
Enable logging of MSDP adjacency changes.
Syntax
ip msdp log-adjacency-changes
To disable logging, use the
no ip msdp log-adjacency-changes
command.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
ip msdp mesh-group
To be a member of a mesh group, configure a peer.
Syntax
ip msdp mesh-group {
name
} {
peer address
}
To remove the peer from a mesh group, use the
no ip msdp mesh-group
{
name
} {
peer address
}
command.
Parameters
name
Enter a string of up to 16 characters long for as the mesh
group name.
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.).
890
Multicast Source Discovery Protocol (MSDP)
